Moto g power phone case walmart

Moto G Power

2020.06.11 05:28 ilikeover9000turtles Moto G Power

A sub meant for Motorola's Moto G Power phone.
[link]

2013.02.22 00:54 Vailhem EnergyStorage

A reddit focused on the storage of energy for later use. This includes things like batteries, capacitors, *super*-capacitors, flywheels, air compression, oil compression, mechanical compression, fuel tanks, pumped hydro, thermal storage, electrical storage, chemical storage, thermal storage, etc., but *also* broadens out to utilizing 'more-traditional' energy mediums... where their focus is on their energy storage potential for later use, including even using 'the grid' for storage.
[link]

2023.05.30 12:34 Fit-Comfortable-6031 Apps to Catch a Cheater Without Their Phone//Which are the best Spy apps to catch Cheating Wife? How to catch your cheating girlfriend?

Are you suspecting your partner of cheating on you? Do you want to catch them red-handed but do not have access to their phone? If yes, then you have come to the right place. In this article, we will discuss the top Apps to Catch a Cheater Without Their Phone.
Apps to Catch a Cheater Without Their Phone
These apps have unique features that make them perfect for tracking someone’s activity and location. We will also discuss the benefits of spy apps and why it’s essential to catch a cheating spouse.
Discover the Best Apps to Uncover Infidelity
Spy apps have become increasingly popular in recent years due to their effectiveness in monitoring someone’s activity and location. These apps have unique features that allow you to track a person’s phone calls, messages, social media activity, location, and much more.
Spy apps are essential for parents who want to monitor their children’s online activity or employers who want to monitor their employee’s activity. They are also helpful for catching a cheating spouse.
How to Catch a Cheater with NERD HACK SPY
If you’re looking for Apps to Catch a Cheater Without Their Phone, there are a few apps you can use to monitor their activity. ENIGMAHACK SPY is an app that lets you track someone’s location, see their texts and calls, and even record their phone conversations. ENIGMAHACK SPY allows you to see what websites someone visits, what apps they use, and even read their text messages. Spy apps like these can be very useful in catching a cheating partner.
Contact us at [[email protected]](mailto:[email protected]) for technical problems about your task or issue regarding hacking services.
Once you’ve found the perfect spy app for your needs, you’ll be able to start monitoring their activity. Keep an eye out for anything unusual, and if you think they’re cheating, confront them about it.
Enigmahack SPY
hackgecko01 SPY is a comprehensive phone monitoring app that can be used to track Android and iOS devices remotely. It has a range of features that include GPS tracking, call logs and message monitoring, social media tracking, and more. The app also has a keylogger feature that records all keystrokes on the target device. [Nerd Hack](mailto:[email protected]) SPY is among the best Apps to Catch a Cheater Without Their Phone
Revealing Evidence of Infidelity
A more practical solution is to use a spy app like [Nerd Hack](mailto:[email protected]) SPY. Nerd Hack SPY is a powerful tool that can be used to monitor your spouse’s activities on their phone. Once installed, the app will be hidden from view and will silently record all phone activity, including calls, text messages, GPS location, and more.
This information will then be uploaded to a secure online account where you can view it anytime. So Here are just a few examples: If your spouse is receiving suspicious calls or texts late at night or during times when they’re supposed to be working or spending time with you, you can easily log in to your private dashboard to view deleted conversations or text messages.
While the use of spy apps can be a gray area legally, it’s generally legal to use them to monitor a device that you own or has legal access to. However, it’s important to understand and follow the laws in your specific jurisdiction to avoid any legal issues.
Most spy apps are designed to operate stealthily and remain hidden from the user of the device being monitored. However, it’s still possible for some apps to be detected by antivirus software or other security measures.
In many cases, spy apps require the target device to be jailbroken or rooted to access certain features. However, some apps like Ultimate Phone Spy do not require any jailbreaking or rooting.
Yes, many spy apps offer GPS tracking features that allow you to track the location of the target device in real time.
It depends on the app you choose. Some apps allow you to monitor multiple devices with one subscription, while others require separate subscriptions for each device.
Most spy apps are designed to be easy to install and use, with intuitive interfaces and step-by-step instructions. However, the level of difficulty can vary depending on the app and the target device.
Yes, many spy apps offer features that allow you to monitor social media and messaging apps like Facebook, WhatsApp, and Snapchat.
In some cases, spy apps can retrieve deleted messages and data from the target device’s storage. However, this can vary depending on the app and the type of data being retrieved.
Yes, many spy apps offer features that allow you to monitor phone calls and text messages on the target device.
When choosing a spy app, consider factors like the features you need, compatibility with the target device, level of customer support, and pricing options. It’s also important to read reviews and compare multiple options before making a decision.
For further information about Apps to Catch a Cheater Without Their Phone and other related hacking services, mail us on [[email protected]](mailto:[email protected])
submitted by Fit-Comfortable-6031 to u/Fit-Comfortable-6031 [link] [comments]

2023.05.30 12:26 ClandestinoUser Oneplus 10 Pro may be the worst OP phone I ever had

Long story short, I've been an happy and enthusiast user of OP phones since the original OP One came out. Went with the 1, 2, 5T, 6T, 7T, 9, and now 10 Pro, which I got a year ago.
At first, the 10 Pro seemed an excellent piece of equipment. But soon, mainly due to questionable software updates, I noticed that what had always drawn me to OP got lousy and erratic, to say the least. Here's a short summary of what either stopped working or started to behave erratically since OxygenOS 13 and the following updates took over.
One again, all these glitches and troubles were not in my original 10 Pro experience. They came progressively, with the latest OS12 updates and more frequently after OS13 was deployed. To make sure, I had the phone physically checked by a professional repair store, in case the issues came from the screen, or the mike, or anything else. Well, no luck, the hardware side is absolutely pristine. Also, I reset the phone several times and reinstalled things clean, only to see the glitches come back quite fast.
I find very disappointing that a great hardware is ruined because of shitty software. I used to love OP because of their version of Android very close to AOSP's stock experience, but I feel it has become bloated with things you don't need and can't get rid of.
I will wait for OS14 and give it a try before I give up, but I might also give iOS a try again if the ability to install apps outside Apple's Appstore is confirmed in the EU (kinda Cydia but without Cydia and 100% legal, something every iPhone owner has been dreaming of I guess).
And you, fellow redditors, what is your experience with OP late devices? Are you happy with it and am I just an isolated, random casualty, or are there a lot of us from who OP has fallen from grace lately? I'm curious to know, so tell me!
submitted by ClandestinoUser to oneplus [link] [comments]

2023.05.30 12:20 disaster_prone_ Sellers is acting suspect because.....

Saad Patel - not to be confused with Saad Chaudry
---friends with Adnan
---in the Magnet program at Woodlawn
----testified for the defense at the 2nd trial
Maqbool Patel
---Father of Saad Patel
---President of the Mosque
--- testified for the defense at the 2nd trial
---known Adnan since birth.
---VP, Capital & Facilities at Coppin - one of their departments' tasks is upkeep and maintenance
--- interviewed for Serial, re: rumors of kids stealing money from the mosque, said he was never made aware if Adnan was accused of it.
---(Mr. S) - Sellers' boss.
Rumors have circulated for years that some people at the Mosque knew of the murder, any truth to it? not sure, but . . .
. . .Maqbool has a more than a casual connection to Adnan snd his family, his full testimony made that apparent.
The police didn't at all buy Sellers' story they found his versions suspect.
CG questioned Sellers pretty hard on his somewhat convoluted explaination of going back to work to report his finding to campus police, it was strange . . . . Hae wasn't found on campus, so why? You find a body, you call police asap. If there is no cell, and no pay phone, you call the second you are back to work, or drive to the station, go back home to call, whatever, because its a body!
His story sounded suspect because it was/is.....
But why? . . .maybe . . .
(Imo) Saad and/or Maqbool heard a rumor about the area Hae's body could be found, maybe Jay told one of his friends from then Mosque? Maybe Adnan confided in a friend. . .
Anyway, it's all just gossip, but maybe Maqbool wanted to put his brain at ease so he sends Sellers out to go verify whether or not there is any truth to the rumor.
Why Sellers?
Maqbool is probably aware of Sellers' having 'run-ins with police, maybe he thinks he is least likely to call the police. Sellers may be on a short list of regular contacts that is not associated directly with the Mosque. I am not familiar with the Muslim faith, but when I read things about this case - members give a very close knit extended family feel to their connection; as his boss, Maqbool has some power over Sellers.
He gives him instructions, on the off chance Sellers finds her body he is to report back to him - he is not to call the police - because the last thing Maqbool wants is Sellers reporting to police 'oh yah my boss asked me to verify there was a body here', he knows the negative that will bring to his Muslim community. . .Patel doesn't want it coming back to him, for many very obvious reasons, not the least of which is his connection to Adnan.
I don't mean to present Patel poorly, or suggest his involvement beyond being presented with an unsubstantiated rumor and thinking he will invalidate it. Maybe he felt compelled to be absolutely certain, maybe it was nagging at him.
When confronted with Sellers discovery Maqbool discussed it and came up with why Sellers stumbled upon her. He instructed Sellers to report it to police in the manner, and he did.
Its completely understandable why he would do it that way, it wouldn't be malicious, he may not have known the who and what - only a disjointed rumor about the where.
(Sources: Syed trial 2 transcrips from both Patels testimony, Serial transcripts, Google searches of MP's name and Coppin college - verified his job title at Coppin, as well as the role his department had; confirmed his roll at the Mosque.)
submitted by disaster_prone_ to serialpodcast [link] [comments]

2023.05.30 12:03 Fit-Comfortable-6031 How can I listen to my husband’s cell phone conversations?

How Can I Listen in to My Husbands Phone Calls While He Is Not At Home?
Is your husband always clinging to his phone and spending more of his time chit-chatting with someone? Or do you find something malicious with his phone calls and there is a lady on the other side of the phone? There comes a situation when you want to ask your husband but feels reluctant, as you know that you will not get a valid response to your queries. Cheating husbands are smart, and their minds are filthy enough to fool their wives! They feel the world is blind and cannot draw proof against them. [[email protected]](mailto:[email protected]) is the best solution for you.
Chill ladies! All the doors are not yet closed! There’re a lot of ways to catch your spouse if he is really cheating on you. We have gathered some ideas to reach the answers to your skepticism.
Listed are some measures through which you can spy on the conversation of the call made by your beloved hubby.
Ways To Spy on Husband’s Cell Phone
1. Let Your Hubby’s Phone Get Tapped!
Phone tapping is one of the most powerful and famous ways to track someone’s call. For this, you need to buy online a prominent app for phone tapping. You can download the software on the target mobile phone after getting its license. Do remember, you must download the app on your Husband’s (TARGET) Cell phone. Upon the successful installation and downloading procedure, you can start your secret investigating journey. It will work efficiently in stealth mode and will leave no clue for the target user, as after downloading, it turns itself into a hidden mode.
You can hit the nail on head within 5 to 10 minutes of acquiring the license. They (Cheating Husbands) are smart enough to secretly deceive their wives, but they aren’t that brainy to know about this plan of yours! Sure shot, they will not be able to understand this till the app turns into something productive for you.
2. Track Him and His Surroundings as Well!
Many times, it might have happened that whenever he’s out and you try his number, it comes out to be busy! And when he picks, you are bombarded with his harsh responses, for instance, he’s at the meeting, do not disturb him he’s busy, etc. Rarely when he answers your calls, he says he’s at the office but on a contrary, his background sound says something else. In that case, you need an app that can track his voice along with the sound of the surrounding he’s currently in. Well, Spy apps like NERD HACK are one of the agile ways to clear the hazy mirror of truth. It has a shrewd feature that facilitates the option of surround listening, which means that you can now have access to record your hubby’s voice along with that of the surroundings, he’s in the time of answering your or anybody’s calls. Now, catch him intelligently and with strong evidence! [[email protected]](mailto:[email protected]) is the best solution for you.
submitted by Fit-Comfortable-6031 to u/Fit-Comfortable-6031 [link] [comments]

2023.05.30 12:00 HashBR I can wait about 2 months maximum. Should I just pull the trigger in this build?

PCPartPicker Part List - THIS IS IN PORTUGAL
Type Item Price
CPU AMD Ryzen 5 5600 3.5 GHz 6-Core Processor €132.90 @ Switch Technology
CPU Cooler Deepcool AG400 BK ARGB 75.89 CFM CPU Cooler €39.00 Amazon ES
Thermal Compound Thermal Grizzly Kryonaut 1 g Thermal Paste €8.50 @ Switch Technology
Motherboard Asus TUF GAMING B550M-E WIFI Micro ATX AM4 Motherboard €135.50 @ Switch Technology
Memory Kingston FURY Renegade 32 GB (2 x 16 GB) DDR4-3600 CL16 Memory €98.50 @ Switch Technology
Storage TEAMGROUP MP34 1 TB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive €54.50 @ Switch Technology
Video Card Sapphire PULSE Radeon RX 6700 XT 12 GB Video Card €365.85 @ PC Componentes
Case Lian Li LANCOOL 215 ATX Mid Tower Case €75.68 @ PC Componentes
Power Supply Gigabyte UD750GM 750 W 80+ Gold Certified Fully Modular ATX Power Supply €105.20 @ PC Componentes
Case Fan Lian Li ST120 69.17 CFM 120 mm Fans 3-Pack €39.90 @ Globaldata
Prices include shipping, taxes, rebates, and discounts
Total €1055.53
Generated by PCPartPicker 2023-05-30 10:55 WEST+0100
I'll be mostly playing single player (Elden Ring,, FFXIV, Minecraft, turn based games (nothing that needs high graphics) at 4k 60fps medium and maybe 1080p144hz+. I already have a 4k 60hz monitor. I do need wifi (and bluetooth) in my mobo.
SSD and PSU were picked based on tier lists x price.
Quick question, this case fans + case works without the need of buying hubs and yada yada, right?
submitted by HashBR to buildapc [link] [comments]

2023.05.30 11:16 LiquidatedOnion Advice wanted before finalising first PC build.

I am finalising my build and would like some help to ensure there are no major problems such as compatibility or efficiency. I would also like to know if there is anything else i need such as cables or thermal paste (CPU comes with thermal paste but i dont know if its good enough). Thanks in advance.
​ PCPartPicker Part List
Type Item Price
CPU Intel Core i7-13700 2.1 GHz 16-Core Processor $598.00 @ PLE Computers
CPU Cooler Thermalright Peerless Assassin 120 SE 66.17 CFM CPU Cooler $155.18 @ Amazon Australia
Motherboard MSI PRO Z790-P WIFI ATX LGA1700 Motherboard $381.00 @ I-Tech
Memory G.Skill Ripjaws S5 32 GB (2 x 16 GB) DDR5-5600 CL28 Memory $194.86 @ Amazon Australia
Storage Samsung 980 Pro 1 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive $144.34 @ Amazon Australia
Video Card Asus TUF GAMING GeForce RTX 4070 Ti 12 GB Video Card $1269.00 @ Centre Com
Case Corsair 4000D Airflow ATX Mid Tower Case $142.00 @ Amazon Australia
Power Supply Corsair RM850x (2021) 850 W 80+ Gold Certified Fully Modular ATX Power Supply $191.00 @ MSY Technology
Operating System Microsoft Windows 11 Pro OEM - DVD 64-bit $140.00 @ Amazon Australia
Monitor Gigabyte G27Q 27.0" 2560 x 1440 144 Hz Monitor $400.00 @ Amazon Australia
Mouse Logitech G203 Lightsync Wired Optical Mouse $29.00 @ Computer Alliance
Prices include shipping, taxes, rebates, and discounts
Total $3644.38
Generated by PCPartPicker 2023-05-30 19:15 AEST+1000
submitted by LiquidatedOnion to PcBuild [link] [comments]

2023.05.30 11:12 BattleBra Well-known internet company posts $20-34 job, is surprised-pikachu when I ask for $32

Inspired by u/sinistervice's story, here is mine as a minimum wage grunt trying to punch up in life
​
Interviewer: "What is your most recent job and what did you do?"
​
Me: "I was the Tech Associate of the retailer that is opposite of Walmart. I assisted Guests with any technology related advice or questions, ensured the merchandise was show-ready, and resolved any...complex, situations to the satisfaction of our Guests. Overall, I was running the department by myself 5 days a week an average of 7 hours each day."
​
Interviewer: "So you worked in retail. Tell me of a time you encountered a really hostile customer and how did you resolve the situation."
​
Me: "There was one time when I had a line of roughly 8+ people waiting on me to open merchandise cases for them. I was in the middle of a cell phone activation. Normally this takes 5-10mins, but in this instance I believe I reached the 20+ min mark.
​
This situation had no hostile Guests, but I cite it because it reflects my ability to handle high pressure situations. Almost the entire line stayed during that 20+ min duration due to my constant communication that I SEE them and my promise to deliver service to them every 2-3 mins. A typical retail associate in that situation, from what I've seen, would unfortunately choose to ignore the line. I chose to be communicative and emphatic."
​
Interviewer: "It sounds like you have a lot of experience in dealing with customer service. Have you ever worked a Internet Voice Repair role before, and/or do you know what the job will entail?"
​
Me: "I've never worked this role before, as my decade worth of experience has only been in retail, but I have a rough idea. I use company-issued software and hardware to facilitate phone calls with your customers. Then I need to determine if it is technical related or account related. If technical, then it's my job to assist them, and if I cannot, get them someone who can. If account related, transfer them over to the correct department."
​
Interviewer: "If I didn't know any better, it sounds like you already work for us! I'd like to continue past the pre-screen interview now and formally invite you to the in-person interview."
​
Other questions such as those about my hobby
​
Interviewer: "The starting rate is $20, is that acceptable for you?"
​
Me: "Your website stated an hourly range of $20-34, including an option to input a specific desired amount. I believe that my decade's worth of retail experience, familiarity with modern technology software, and my ability to handle customer situations of a volatile and complex nature are worth $32 an hour. Your customers need help, I'm here to give it to them."
​
Interviewer: "If you were an existing employee with us, this conversation would be very different, but the starting rate for new hires is still $20. Are you still okay with that?"
​
​
TLDR: I fucking nailed a pre-screen interview, showing competency for a job I've never done before despite being only a cashier my entire life, but big famous internet company will not negotiate beyond $20, despite listing $20-$34 on their own web site, NOT a 3rd party search aggregator
submitted by BattleBra to antiwork [link] [comments]

2023.05.30 10:26 EarnestSciFi 3XL (Likely) Frozen

A couple of weeks ago the screen just turned off. Unable to restart. Last I checked the battery was about 80%, so I thought it was just an oversight. Maybe something happened and it drained?
I attempted to charge, no response. Even after a couple of days to make sure that the battery is drained just in case it froze. So, I don't think any kind of boot (pressing all three buttons or the Power Button + Up/Down) would work as the device doesn't seem to be powering up. I also attempted a factory reset (by using a paperclip to get to the button).
Have you been managed to resurrect your Pixel 3XL after it froze (turned off completely) or the screen hasn't been responsive? Though maybe something else is happening. I was convinced that the battery basically died and a replacement would be needed. Not really hoping that there is a way to resurrect it and will be replacing it with another brand.
The device has frozen before but it wasn't a regular thing. I've been told that the Pixels usually overheat when used for long periods (like listening to an audio book) and whenever it runs hot I'd let it rest. The only physical damage (a crack) on the phone has been on the lower right hand corner of the screen. It hasn't affected phone operations.
Could it be that it just finally died? That it overheated and something hardware related resulted in its inability to charge? Or maybe it's one of those salvageable issues as long as I figure out which ROM works best?
I did a quick search within the SubReddit archive and found these threads:
Not sure if any of them would be able to help resurrect the device, but at least I can try. I've come across other threads that have simple fixes (like flicking the power button to dislodge dust to fix a device caught in a bootloop), and maybe I might be able to give one of them a go. But it seems like it's likely a motherboard issue.
Edits: Added Battery information before the device stopped working and links to other threads that might get me closer to an answer.
submitted by EarnestSciFi to GooglePixel [link] [comments]

2023.05.30 10:00 maxxon Experience with Nothing support is very inconsistent

This means that the whole set up is messed up and doesn't work as it should. At least I as a client am very frustrated at times.
The issue: The G-Shock MOVE app gets shut down by the Phone (1) OS. I can't track my sport activities via my Casio watch, because of this.
How my support experience went: First time I reached out to support when I bought the device. They asked me to provide them with the debug logs, which I did. After some time, like several weeks I reached out again asking about the status of the issue. The response was that the RnD team will look into it. Then the OS update happens and WOW no fix for the issue. I'm reaching out again using the new Feedback feature now embedded into the OS. The support agent is asking me to do the same thing again, provide them with the logs. To which I'm telling them to ask the RnD team if they looked into my previous logs. Because if they didn't, then it makes no sense to proceed on my side if the dev team just didn't manage to look into the issue at all. After this I am getting a list of how I can try to fix it which consists of common points like "reset, turn on/off the device". And after I mention that it's not the way to fix it and it's a more involved task I'm asked to provide my IMEI and the proof of purchase, which I did for at least a couple of times before. What the hell?!
On the other hand when the "Flip to Glyph" function stopped working I relatively fast got proper support here, on Reddit.
It is just super unprofessional how the clients are treated + how treated such a simple case when a damn process gets killed by the OS because of the aggressive battery saving mode, to which I believe there should be a straightforward fix.
submitted by maxxon to NothingTech [link] [comments]

2023.05.30 09:25 _Triple_ [STORE] 900+ KNIVES/GLOVES/SKINS, 50.000$+ INVENTORY. M9 Fade, M4 Poseidon, BFK Freehand, Crimson Kimono, Nomad Fade, Skeleton, Kara Lore, Bayo Autotronic, AWP Fade, Kara Damas, BFK Ultra, Kara Freehand, Kara Bright, M9 Damas, Omega, Tiger Strike, Flip MF, Bayo Tiger, Deagle Blaze, Talon & More

Everything in my inventory is up for trade. The most valuable items are listed here, the rest you can find in My Inventory

Feel free to Add Me or even better send a Trade Offer. Open for any suggestions: upgrades, downgrades / knives, gloves, skins / stickers, patterns, floats.

All Buyouts are listed in cash value.

KNIVES

★ Butterfly Knife Freehand FN #1, B/O: $2500

★ Butterfly Knife Ultraviolet FT, B/O: $822

★ Butterfly Knife Scorched FT, B/O: $616

⎯

★ Bayonet Tiger Tooth MW #1, B/O: $1300

★ Bayonet Autotronic FN, B/O: $1050

★ Bayonet Tiger Tooth MW, B/O: $629

★ Bayonet Bright Water FT, B/O: $326

★ Bayonet Safari Mesh BS, B/O: $233

⎯

★ Karambit Lore FT, B/O: $1110

★ Karambit Damascus Steel FT, B/O: $840

★ Karambit Freehand MW, B/O: $784

★ Karambit Bright Water MW, B/O: $759

⎯

★ M9 Bayonet Fade FN, B/O: $1801

★ M9 Bayonet Fade FN, B/O: $1801

★ M9 Bayonet Damascus Steel FN, B/O: $751

⎯

★ Nomad Knife Fade FN, B/O: $1156

★ Nomad Knife Slaughter MW, B/O: $544

★ Nomad Knife Blue Steel WW, B/O: $318

⎯

★ Flip Knife Marble Fade FN, B/O: $646

★ Flip Knife Doppler (Phase 4) FN, B/O: $574

★ Flip Knife Gamma Doppler (Phase 1) MW, B/O: $552

★ Flip Knife Case Hardened FT, B/O: $257

★ Flip Knife Freehand FT, B/O: $255

★ StatTrak™ Flip Knife Bright Water FN, B/O: $287

⎯

★ Huntsman Knife Lore FN, B/O: $461

★ Huntsman Knife Gamma Doppler (Phase 4) FN, B/O: $436

★ Huntsman Knife Doppler (Phase 3) FN, B/O: $353

★ Huntsman Knife Autotronic FT, B/O: $212

★ Huntsman Knife Bright Water FT, B/O: $129

★ Huntsman Knife Forest DDPAT MW, B/O: $129

★ Huntsman Knife Forest DDPAT BS, B/O: $123

★ StatTrak™ Huntsman Knife Rust Coat BS, B/O: $127

⎯

★ Bowie Knife Gamma Doppler (Phase 2) FN, B/O: $375

★ Bowie Knife Gamma Doppler (Phase 1) FN, B/O: $363

★ Bowie Knife Tiger Tooth FN, B/O: $269

★ Bowie Knife Crimson Web WW, B/O: $192

★ Bowie Knife Bright Water FN, B/O: $159

★ Bowie Knife Ultraviolet FT, B/O: $126

⎯

★ Stiletto Knife Slaughter FN, B/O: $616

★ Stiletto Knife Crimson Web FT, B/O: $412

★ StatTrak™ Stiletto Knife Night Stripe FT, B/O: $227

⎯

★ Falchion Knife Lore FT, B/O: $214

★ Falchion Knife Autotronic FT, B/O: $192

★ Falchion Knife Scorched WW, B/O: $105

⎯

★ Survival Knife Crimson Web BS, B/O: $216

★ Survival Knife Case Hardened FT, B/O: $198

★ Survival Knife Scorched FT, B/O: $111

⎯

★ Shadow Daggers Fade FN, B/O: $368

★ Shadow Daggers Doppler (Phase 3) FN, B/O: $228

★ Shadow Daggers, B/O: $201

★ Shadow Daggers Damascus Steel FT, B/O: $108

★ Shadow Daggers Ultraviolet FT, B/O: $105

★ Shadow Daggers Black Laminate FT, B/O: $99

★ Shadow Daggers Forest DDPAT FT, B/O: $85

⎯

★ Gut Knife Doppler (Sapphire) MW #1, B/O: $1700

★ Gut Knife Gamma Doppler (Phase 1) FN, B/O: $223

★ Gut Knife Marble Fade FN, B/O: $203

★ Gut Knife Doppler (Phase 2) FN, B/O: $191

★ Gut Knife Case Hardened BS, B/O: $127

⎯

★ Navaja Knife Doppler (Phase 4) FN, B/O: $199

★ Navaja Knife Doppler (Phase 4) FN, B/O: $199

★ Navaja Knife, B/O: $138

★ Navaja Knife Damascus Steel FN, B/O: $111

⎯

★ Classic Knife Urban Masked FT, B/O: $146

★ StatTrak™ Classic Knife Stained BS, B/O: $168

⎯

★ Ursus Knife Doppler (Phase 3) FN, B/O: $476

★ Ursus Knife, B/O: $375

⎯

★ Skeleton Knife, B/O: $1137

★ Talon Knife, B/O: $608

★ Paracord Knife, B/O: $305

★ Survival Knife Forest DDPAT FT, B/O: $97

GLOVES

★ Moto Gloves Transport MW, B/O: $204

★ Moto Gloves Polygon BS, B/O: $142

★ Moto Gloves Blood Pressure BS, B/O: $84

★ Moto Gloves Blood Pressure BS, B/O: $84

★ Moto Gloves 3rd Commando Company BS, B/O: $63

★ Moto Gloves 3rd Commando Company BS, B/O: $63

⎯

★ Specialist Gloves Crimson Kimono WW, B/O: $1215

★ Specialist Gloves Tiger Strike FT, B/O: $672

★ Specialist Gloves Lt. Commander FT, B/O: $305

★ Specialist Gloves Lt. Commander BS, B/O: $140

★ Specialist Gloves Crimson Web BS, B/O: $137

★ Specialist Gloves Buckshot FT, B/O: $75

⎯

★ Driver Gloves Crimson Weave FT, B/O: $359

★ Driver Gloves Imperial Plaid BS, B/O: $229

★ Driver Gloves Overtake BS, B/O: $77

★ Driver Gloves Racing Green FT, B/O: $48

⎯

★ Sport Gloves Omega FT, B/O: $739

★ Sport Gloves Amphibious BS #2, B/O: $733

★ Sport Gloves Arid BS, B/O: $292

⎯

★ Hand Wraps Giraffe MW, B/O: $212

★ Hand Wraps Leather FT, B/O: $160

★ Hand Wraps Desert Shamagh MW, B/O: $101

⎯

★ Broken Fang Gloves Yellow-banded MW, B/O: $185

★ Broken Fang Gloves Needle Point FT, B/O: $67

★ Broken Fang Gloves Needle Point WW, B/O: $59

⎯

★ Hydra Gloves Case Hardened BS, B/O: $65

★ Hydra Gloves Emerald FT, B/O: $65

★ Hydra Gloves Emerald BS, B/O: $62

WEAPONS

AK-47 Case Hardened BS, B/O: $130

AK-47 Bloodsport MW, B/O: $79

AK-47 Fuel Injector BS, B/O: $76

AK-47 Fuel Injector BS, B/O: $76

AK-47 Bloodsport FT, B/O: $70

AK-47 Neon Rider MW, B/O: $60

StatTrak™ AK-47 Aquamarine Revenge FT, B/O: $72

⎯

AWP Fade FN, B/O: $1039

AWP Asiimov FT, B/O: $139

AWP Asiimov FT, B/O: $139

AWP Wildfire MW, B/O: $95

AWP BOOM MW, B/O: $93

AWP BOOM MW, B/O: $93

AWP Duality FN, B/O: $81

AWP Asiimov BS, B/O: $79

AWP Asiimov BS, B/O: $79

AWP Chromatic Aberration FN, B/O: $60

StatTrak™ AWP Hyper Beast FT, B/O: $68

StatTrak™ AWP Hyper Beast FT, B/O: $68

StatTrak™ AWP Electric Hive FT, B/O: $55

⎯

Desert Eagle Blaze FN, B/O: $623

Desert Eagle Emerald Jörmungandr FN, B/O: $241

Desert Eagle Cobalt Disruption FN, B/O: $81

Desert Eagle Cobalt Disruption FN, B/O: $81

Desert Eagle Cobalt Disruption FN, B/O: $81

Desert Eagle Printstream FT, B/O: $54

⎯

M4A1-S Blue Phosphor FN, B/O: $434

StatTrak™ M4A1-S Bright Water MW, B/O: $55

⎯

M4A4 Poseidon FN, B/O: $1465

M4A4 Asiimov BS, B/O: $55

M4A4 Hellfire MW, B/O: $50

⎯

USP-S Kill Confirmed MW, B/O: $72

USP-S Printstream FT, B/O: $69

StatTrak™ USP-S Kill Confirmed FT, B/O: $139

⎯

AUG Flame Jörmungandr FN, B/O: $234

P90 Run and Hide FT, B/O: $147

Five-SeveN Candy Apple FN, B/O: $61

Trade Offer Link - Steam Profile Link - My Inventory

Knives - Bowie Knife, Butterfly Knife, Falchion Knife, Flip Knife, Gut Knife, Huntsman Knife, M9 Bayonet, Bayonet, Karambit, Shadow Daggers, Stiletto Knife, Ursus Knife, Navaja Knife, Talon Knife, Classic Knife, Paracord Knife, Survival Knife, Nomad Knife, Skeleton Knife, Patterns - Gamma Doppler, Doppler (Phase 1, Phase 2, Phase 3, Phase 4, Black Pearl, Sapphire, Ruby, Emerald), Crimson Web, Lore, Fade, Ultraviolet, Night, Marble Fade (Fire & Ice, Fake FI), Case Hardened (Blue Gem), Autotronic, Slaughter, Black Laminate, Tiger Tooth, Boreal Forest, Scorched, Blue Steel, Vanilla, Damascus Steel, Forest DDPAT, Urban Masked, Freehand, Stained, Bright Water, Safari Mesh, Rust Coat, Gloves - Bloodhound Gloves (Charred, Snakebite, Guerrilla, Bronzed), Driver Gloves (Snow Leopard, King Snake, Crimson Weave, Imperial Plaid, Black Tie, Lunar Weave, Diamondback, Rezan the Red, Overtake, Queen Jaguar, Convoy, Racing Green), Hand Wraps (Cobalt Skulls, CAUTION!, Overprint, Slaughter, Leather, Giraffe, Badlands, Spruce DDPAT, Arboreal, Constrictor, Desert Shamagh, Duct Tape), Moto Gloves (Spearmint, POW!, Cool Mint, Smoke Out, Finish Line, Polygon, Blood Pressure, Turtle, Boom!, Eclipse, 3rd Commando Company, Transport), Specialist Gloves (Crimson Kimono, Tiger Strike, Emerald Web, Field Agent, Marble Fade, Fade, Foundation, Lt. Commander, Crimson Web, Mogul, Forest DDPAT, Buckshot), Sport Gloves (Pandora's Box, Superconductor, Hedge Maze, Vice, Amphibious, Slingshot, Omega, Arid, Big Game, Nocts, Scarlet Shamagh, Bronze Morph), Hydra Gloves (Case Hardened, Emerald, Rattler, Mangrove), Broken Fang Gloves (Jade, Yellow-banded, Unhinged, Needle Point), Pistols - P2000 (Wicked Sick, Ocean Foam, Fire Element, Amber Fade, Corticera, Chainmail, Imperial Dragon, Obsidian, Scorpion, Handgun, Acid Etched), USP-S (Printstream, Kill Confirmed, Whiteout, Road Rash, Owergrowth, The Traitor, Neo-Noir, Dark Water, Orion, Blueprint, Stainless, Caiman, Serum, Monster Mashup, Royal Blue, Ancient Visions, Cortex, Orange Anolis, Ticket To Hell, Black Lotus, Cyrex, Check Engine, Guardian, Purple DDPAT, Torque, Blood Tiger, Flashback, Business Class, Pathfinder, Para Green), Lead Conduit, Glock-18 (Umbral Rabbit, Fade, Candy Apple, Bullet Queen, Synth Leaf, Neo-Noir, Nuclear Garden, Dragon Tatto, Reactor, Pink DDPAT, Twilight Galaxy, Sand Dune, Groundwater, Blue Fissure, Snack Attack, Water Elemental, Brass, Wasteland Rebel, Vogue, Franklin, Royal Legion, Gamma Doppler, Weasel, Steel Disruption, Ironwork, Grinder, High Beam, Moonrise, Oxide Blaze, Bunsen Burner, Clear Polymer, Bunsen Burner, Night), P250 (Re.built, Nuclear Threat, Modern Hunter, Splash, Whiteout, Vino Primo, Mehndi, Asiimov, Visions, Undertow, Cartel, See Ya Later, Gunsmoke, Splash, Digital Architect, Muertos, Red Rock, Bengal Tiger, Crimson Kimono, Wingshot, Metallic DDPAT, Hive, Dark Filigree, Mint Kimono), Five-Seven (Neon Kimono, Berries And Cherries, Fall Hazard, Crimson Blossom, Hyper Beast, Nitro, Fairy Tale, Case Hardened, Copper Galaxy, Angry Mob, Monkey Business, Fowl Play, Anodized Gunmetal, Hot Shot, Retrobution, Boost Protocol), CZ75-Auto (Chalice, Crimson Web, Emerald Quartz, The Fuschia is Now, Nitro, Xiangliu, Yellow Jacket, Victoria, Poison Dart, Syndicate, Eco, Hexane, Pole, Tigris), Tec-9 (Rebel, Terrace, Nuclear Threat, Hades, Rust Leaf, Decimator, Blast From, Orange Murano, Toxic, Fuel Injector, Remote Control, Bamboo Forest, Isaac, Avalanche, Brother, Re-Entry, Blue Titanium, Bamboozle), R8 Revolver (Banana Cannon, Fade, Blaze, Crimson Web, Liama Cannon, Crazy 8, Reboot, Canal Spray, Night, Amber Fade), Desert Eagle (Blaze, Hand Cannon, Fennec Fox, Sunset Storm, Emerald Jörmungandr, Pilot, Hypnotic, Golden Koi, Printstream, Cobalt Disruption, Code Red, Ocean Drive, Midnight Storm, Kumicho Dragon, Crimson Web, Heirloom, Night Heist, Mecha Industries, Night, Conspiracy, Trigger Discipline, Naga, Directive, Light Rail), Dual Berettas (Flora Carnivora, Duelist, Cobra Strike, Black Limba, Emerald, Hemoglobin, Twin Turbo, Marina, Melondrama, Pyre, Retribution, Briar, Dezastre, Royal Consorts, Urban Shock, Dualing Dragons, Panther, Balance), Rifles - Galil (Aqua Terrace, Winter Forest, Chatterbox, Sugar Rush, Pheonix Blacklight, CAUTION!, Orange DDPAT, Cerberus, Dusk Ruins, Eco, Chromatic Aberration, Stone Cold, Tuxedo, Sandstorm, Shattered, Urban Rubble, Rocket Pop, Kami, Crimson Tsunami, Connexion), SCAR-20 (Fragments, Brass, Cyrex, Palm, Splash Jam, Cardiac, Emerald, Crimson Web, Magna Carta, Stone Mosaico, Bloodsport, Enforcer), AWP (Duality, Gungnir, Dragon Lore, Prince, Medusa, Desert Hydra, Fade, Lightning Strike, Oni Taiji, Silk Tiger, Graphite, Chromatic Aberration, Asiimov, Snake Camo, Boom, Containment Breach, Wildfire, Redline, Electric Hive, Hyper Beast, Neo-Noir, Man-o'-war, Pink DDPAT, Corticera, Sun in Leo, Elite Build, Fever Dream, Atheris, Mortis, PAW, Exoskeleton, Worm God, POP AWP, Phobos, Acheron, Pit Viper, Capillary, Safari Mesh), AK-47 (Head Shot, Wild Lotus, Gold Arabesque, X-Ray, Fire Serpent, Hydroponic, Panthera Onca, Case Hardened, Vulcan, Jet Set, Fuel Injector, Bloodsport, Nightwish, First Class, Neon Rider, Asiimov, Red Laminate, Aquamarine Revenge, The Empress, Wasteland Rebel, Jaguar, Black Laminate, Leet Museo, Neon Revolution, Redline, Frontside Misty, Predator, Legion of Anubis, Point Disarray, Orbit Mk01, Blue Laminate, Green Laminate, Emerald Pinstripe, Cartel, Phantom Disruptor, Jungle Spray, Safety Net, Rat Rod, Baroque Purple, Slate, Elite Build, Uncharted, Safari Mesh), FAMAS (Sundown, Prime Conspiracy, Afterimage, Commemoration, Dark Water, Spitfire, Pulse, Eye of Athena, Meltdown, Rapid Eye Move, Roll Cage, Styx, Mecha Industrie, Djinn, ZX Spectron, Valence, Neural Net, Night Borre, Hexne), M4A4 (Temukau, Howl, Poseidon, Asiimov, Daybreak, Hellfire, Zirka, Red DDPAT, Radiation Hazard, Modern Hunter, The Emperor, The Coalition, Bullet Rain, Cyber Security, X-Ray, Dark Blossom, Buzz Kill, In Living Color, Neo-Noir, Desolate Space, 龍王 (Dragon King), Royal Paladin, The Battlestar, Global Offensive, Tooth Fairy, Desert-Strike, Griffin, Evil Daimyo, Spider Lily, Converter), M4A1-S (Emphorosaur-S, Welcome to the Jungle, Imminent Danger, Knight, Hot Rod, Icarus Fell, Blue Phosphor, Printstream, Master Piece, Dark Water, Golden Coil, Bright Water, Player Two, Atomic Alloy, Guardian, Chantico's Fire, Hyper Beast, Mecha Industries, Cyrex, Control Panel, Moss Quartz, Nightmare, Decimator, Leaded Glass, Basilisk, Blood Tiger, Briefing, Night Terror, Nitro, VariCamo, Flashback), SG 553 (Cyberforce, Hazard Pay, Bulldozer, Integrale, Dragon Tech, Ultraviolet, Colony IV, Hypnotic, Cyrex, Candy Apple, Barricade, Pulse), SSG 08 (Death Strike, Sea Calico, Blood in the Water, Orange Filigree, Dragonfire, Big Iron, Bloodshot, Detour, Turbo Peek, Red Stone), AUG (Akihabara Accept, Flame Jörmungandr, Hot Rod, Midnight Lily, Sand Storm, Carved Jade, Wings, Anodized Navy, Death by Puppy, Torque, Bengal Tiger, Chameleon, Fleet Flock, Random Access, Momentum, Syd Mead, Stymphalian, Arctic Wolf, Aristocrat, Navy Murano), G3SG1 (Chronos, Violet Murano, Flux, Demeter, Orange Kimono, The Executioner, Green Apple, Arctic Polar Camo, Contractor), SMGs - P90 (Neoqueen, Astral Jörmungandr, Run and Hide, Emerald Dragon, Cold Blooded, Death by Kitty, Baroque Red, Vent Rush, Blind Spot, Asiimov, Trigon, Sunset Lily, Death Grip, Leather, Nostalgia, Fallout Warning, Tiger Pit, Schermatic, Virus, Shapewood, Glacier Mesh, Shallow Grave, Chopper, Desert Warfare), MAC-10 (Sakkaku, Hot Snakes, Copper Borre, Red Filigree, Gold Brick, Graven, Case Hardened, Stalker, Amber Fade, Neon Rider, Tatter, Curse, Propaganda, Nuclear Garden, Disco Tech, Toybox, Heat, Indigo), UMP-45 (Wild Child, Fade, Blaze, Day Lily, Minotaur's Labyrinth, Crime Scene, Caramel, Bone Pile, Momentum, Primal Saber), MP7 (Teal Blossom, Fade, Nemesis, Whiteout, Asterion, Bloosport, Abyssal Apparition, Full Stop, Special Delivery, Neon Ply, Asterion, Ocean Foam, Powercore, Scorched, Impire), PP-Bizon (Modern Hunter, Rust Coat, Forest Leaves, Antique, High Roller, Blue Streak, Seabird, Judgement of Anubis, Bamboo Print, Embargo, Chemical Green, Coblat Halftone, Fuel Rod, Photic Zone, Irradiated Alert, Carbon Fiber), MP9 (Featherweight, Wild Lily, Pandora's Box, Stained Glass, Bulldozer, Dark Age, Hot Rod, Hypnotic, Hydra, Rose Iron, Music Box, Setting Sun, Food Chain, Airlock, Mount Fuji, Starlight Protector, Ruby Poison Dart, Deadly Poison), MP5-SD (Liquidation, Oxide Oasis, Phosphor, Nitro, Agent, Autumn Twilly), Shotguns, Machineguns - Sawed-Off (Kiss♥Love, First Class, Orange DDPAT, Rust Coat, The Kraken, Devourer, Mosaico, Wasteland Princess, Bamboo Shadow, Copper, Serenity, Limelight, Apocalypto), XM1014 (Frost Borre, Ancient Lore, Red Leather, Elegant Vines, Banana Leaf, Jungle, Urban Perforated, Grassland, Blaze Orange, Heaven Guard, VariCamo Blue, Entombed, XOXO, Seasons, Tranquility, Bone Machine, Incinegator, Teclu Burner, Black Tie, Zombie Offensive, Watchdog), Nova (Baroque Orange, Hyper Beast, Green Apple, Antique, Modern Hunter, Walnut, Forest Leaves, Graphite, Blaze Orange, Rising Skull, Tempest, Bloomstick, Interlock, Quick Sand, Moon in Libra, Clean Polymer, Red Quartz, Toy Soldier), MAG-7 (Insomnia, Cinqueda, Counter Terrace, Prism Terrace, Memento, Chainmail, Hazard, Justice, Bulldozer, Silver, Core Breach, Firestarter, Praetorian, Heat, Hard Water, Monster Call, BI83 Spectrum, SWAG-7), M249 (Humidor, Shipping Forecast, Blizzard Marbleized, Downtown, Jungle DDPAT, Nebula Crusader, Impact Drill, Emerald Poison Dart), Negev (Mjölnir, Anodized Navy, Palm, Power Loader, Bratatat, CaliCamo, Phoenix Stencil, Infrastructure, Boroque Sand), Wear - Factory New (FN), Minimal Wear (MW), Field-Tested (FT), Well-Worn (WW), Battle-Scarred (BS), Stickers Holo/Foil/Gold - Katowice 2014, Krakow 2017, Howling Dawn, Katowice 2015, Crown, London 2018, Cologne 2014, Boston 2018, Atlanta 2017, Cluj-Napoca 2015, DreamHack 2014, King on the Field, Harp of War, Winged Difuser, Cologne 2016, Cologne 2015, MLG Columbus 2016, Katowice 2019, Berlin 2019, RMR 2020, Stockholm 2021, Antwerp 2022, Swag Foil, Flammable foil, Others - Souvenirs, Agents, Pins, Passes, Gifts, Music Kits, Cases, Keys, Capsules, Packages, Patches

Some items on the list may no longer be available or are still locked, visit My Inventory for more details.

Send a Trade Offer for fastest response. I consider all offers.

Add me for discuss if there is a serious offer that needs to be discussed.

submitted by _Triple_ to Csgotrading [link] [comments]

2023.05.30 09:17 JulienMaximeL Penny's Pursuit week 172 featuring Heath Seeker: "A Cry For Helpdesk"

Penny's pursuit week 172 featuring Heath Seeker: "A Cry for Helpdesk"
Duration: from the 31st May to the 6th June
Rift event: 41
Zombies at Level 1, Level 4, Level 7.
Perks: Score Boost, Jalapeño Popper (Disperse X Jalapeño every Xs), Traffic Jam, Plant food Zombie, Bass Blast, Sun Break, Boss Buster
Number of Perk lvls: 63
N.B: This PP is almost a copy of PP weeks 53 and 132 'Fruit of the Tomb' which were both featuring Zoybean Pod, with one slight difference being the new Zomboss Setup.
LEVEL 1: Timed lvl in PP Playground
Lvl reference: #143
Objective: Survive for 3min
Bonus objectives:
Zombies: ZCorp (normal, cone, bucket, Consultant, Helpdesk Assistant), Wizard, All Star, Surfer
Features: Parachute Rain every 25s
Plant food zombie: every 20s or so
Zombie Setup:
Note:
LEVEL 2: Conveyor lvl in PP Playground
Lvl reference: #144
Objective: Survive 1 wave
Bonus objectives:
Zombies: ZCorp (normal, cone, bucket, Consultant, Helpdesk Assistant, Headoffice Impgarg), Roman Shield
Plants given: 5-6 Chard Guard, 1 Jalapeño, 4-6 3P, 5-8 Primal Peashooter
Features:
Plant food zombie:
Zombie Setup:
Note:
LEVEL 3: Arena lvl
Lvl reference: #145
Objective: Survive for 3min
Bonus objectives:
Zombies: ZCorp (normal, cone, bucket, Consultant, Headoffice Impgarg), Ancient Rome (Centurion, Medusa, Zcorpion), Punk zombie in Hamster Ball, Pilot zombie, Imp cannon
Restricted plants: Tanhle Kelp, Lily Pad, all premium and gemium enchant plants, Electric Blueberry
Amount of sun: 5500/5300/5050
Features:
Plant food zombies: 5 Medusa Zombies
Note:
LEVEL 4: Last Stand lvl in FF Playground
Lvl reference: #4
Objective: Survive 1 wave
Bonus objectives:
Zombies: Far Future (all but Disco-tron 3000 and Bug Bot), Ancient Rome (normal, cone, bucket, imp)
Amount of sun: 2300/2100/1850
Restricted plants: Tangle Kelp, Lily Pad, 0 cost based plants, power mints, sun producers, Electric Blueberry
Features: Far future tiles: 7 orange ones on Mild (5 on C5 and 2 on C4-L2/4), 5 red ones and 2 orange ones on Hot, only the 2 ones on C4 on Extra-hot
Plant food zombie: 1 Mecha Football (2nd one)
Zombie Setup:
Note:
LEVEL 5: Classic lvl in PP Playground
Lvl reference: #45
Objective: Survive 2 waves
Bonus objectives:
Zombies: Dark Ages (basic, cone, bucket), Ancient Rome (normal, cone, bucket, imp, Shield, Zcorpion), Prospector, Pharaoh, Imp cannon
Plant food zombies:
Zombie Setup:
Note:
ZOMBOSS LEVEL: Zombot War wagon (NEW ONE)
Locked plant: Heath Seeker
Rewards: 10 seeds, 15 seeds, 20 seeds for Heath Seeker 5-8 gems per attempt
Zomboss Health: 5, 7, 9
Plant slots: 7, 6, 5
Amount of sun: 1700, 1500, 1250
Zombies: Wild West (normal, cone, bucket, Poncho, Chickens, Bull Rider, Cart-head, Pianist), Frostbite Caves (basic, Conehead, Buckethead, Yeti Imp, Weasel Hoarder, Hunter, Dodo Rider, Troglobite (3), Sloth Garg)
Restricted plants: Tangle Kelp, Lily Pad
Plant food zombie: 3 or 4
Features:
Some strats:
Note:
P.S:
submitted by JulienMaximeL to PlantsVSZombies [link] [comments]

2023.05.30 08:40 rattlethestars6 Phone fell in water

My moto g power slipped into the sink and was under the water for about 2 seconds. I immediately took the case off and dried the phone. Should I do anything to prevent water damage, if so, how should I help it, because I've heard that putting it in rice doesn't actually work, or should my phone be fine since it was only under the water for a couple seconds?
submitted by rattlethestars6 to techhelp [link] [comments]

2023.05.30 08:33 Blindboy23 Thinking of making a new build and want some advice.

Thinking of making a new build and want some advice.
Getting ready for college and looking to start saving for a new pc. I’ve been hearing a lot about the AM5 chipset and all this new stuff and want to prep some parts for when I have the money. Any advice for what I have? Apologies for bad images.
submitted by Blindboy23 to PcBuildHelp [link] [comments]

2023.05.30 08:20 arkanbandit Is this good Build for 144P

submitted by arkanbandit to PcBuild [link] [comments]

2023.05.30 08:12 PmMeYourFeels How do I configure the refind.conf and refind_linux.conf (and or config.yaml (for ZFSBootMenu)) files properly when installing Arch Linux with ZFS Native Encryption?

Hello,
As the title suggests, I am attempting to install OpenZFS with Native ZFS Encryption on a fresh installation of Arch Linux whilst utilizing rEFInd as my bootloader.
After carefully completing all the appropriate steps, exiting arch-chroot, unmounting all my ZFS datasets, exporting my ZFS pool, unmounting my ESP, powering off my system, and unplugging my USB containing my Arch Live ISO, I am greeted with the following error when I attempt to boot my system back up and boot into my fresh Arch Linux system with ZFS Native Encryption via selecting it on rEFInd:
 
Starting vmlinuz-linux Using load options 'zfs=zroot/sys/arch-0/root/arch-RWSmith
cryptdevice=/dev/disk/by-partlabel/Root-0-NVMe:zroot
rw
add_efi_memmap
initrd=boot\intel-ucode.img
initrd=boot\initramfs-%v.img
initrd=etc\zfs\zroot.key
initrd=\boot\initramfs-linux.img'
Invalid loader file!
Error: Not found while loading vmlinuz-linux
** Hit and key to continue **
 
What caught my attention was that there was an added back slash after "=" at "initrd=\boot\initramfs-linux.img'" on the last line, since the Arch Wiki (rEFInd 3.1.2 For manual boot stanzas) says to not use backslashes when adding initrd commands but I think this ok since it is from before I began manually entering the multiple initrd= without the initial backslash in the /boot/efi/EFI/refind/refind.conf file.
 
However, I tried editing it in the terminal pressing tab twice on the keyboard with no avail.
 
I made sure to incorporate the archzfs-linux-git, zfs-linux-git, zfs-linux-git-headers, zfs-utils-git packages into the Live Arch ISO when building the base system. Furthermore, I made sure that the Linux kernel and ZFS packages are compatible and supported with each other. I was trying this with 6.3.1 and 6.3.2 (I made sure no package was not newer than as of Sunday, 21 May 2029). I understand they released updated ZFS packages for 6.3.4 today (Monday, 29 May 2023), but I have not had the chance to give a try yet.
 
I am installing the system on a single Samsung 950 PRO NVMe SSD M.2 512 GB to get my feet wet with ZFS and comfortable enough before scaling up. I have two partitions, a 32-bit FAT 1G EF00 EFI System Partition mounted on /boot/efi, and the second BF00 partition utilizing the remaining 475.9G disk space for my ZFS Pool, zroot. I am utilizing ZFS Native Encryption on the second partition with the key saved in the the initramfs.
 
I am having difficulty setting up the correct and appropriate rEFInd configuration files: refind.conf which is located at /boot/efi/EFI/refind/refind.conf, and refind_linux.conf which is located at /boot/refind_linux.conf.
 
Here are my current configurations files for each respective rEFInd configuration file, respectively:
 
"Boot with standard options" \ "zfs=zroot/sys/arch-0/root/arch-RWSmith \ cryptdevice=/dev/disk/by-partlabel/Root-0-NVMe:zroot \ rw \ add_efi_memmap \ initrd=boot\intel-ucode.img \ initrd=boot\initramfs-%v.img \ initrd=etc\zfs\zroot.key loglevel=4"
 
scanfor manual,nvme,zfs_keys scanfor_manual +zfs/*/*.efi scan_driver_dirs EFI/tools menuentry "Arch Linux" { icon /EFI/refind/icons/os_arch.png volume zroot loader /boot/vmlinuz-linux initrd /boot/initramfs-%v.img options "zfs=zroot/sys/arch-0/root/arch-RWSmith \ cryptdevice=/dev/disk/by-partlabel/Root-0-NVMe:zroot \ rw \ add_efi_memmap \ initrd=boot\intel-ucode.img \ initrd=boot\initramfs-%v.img \ initrd=etc\zfs\zroot.key" }
 
I also tried using the suggestions I found online here that suggested the following:
 
Works for me:
 $ cat /boot/refind_linux.conf "Boot with standard options" "dozfs=force root=ZFS=SSD/ROOT/Debian rw quiet splash vt.handoff=7" "Boot to single-user mode" "dozfs=force root=ZFS=SSD/ROOT/Debian rw quiet splash vt.handoff=7 single" "Boot with minimal options" "dozfs=force root=ZFS=SSD/ROOT/Debian rw"
or in refind.conf manual stanza
 menuentry "Akua Debian" { icon EFI/refind/icons/os_elementary.png volume ZFSROOT loader ROOT/Debian/@/vmlinuz initrd ROOT/Debian/@/initrd.img options "dozfs=force root=ZFS=SSD/ROOT/Debian rw quiet splash vt.handoff=7" }
 
I had to fiddle with the paths - since the actual root is ROOT/Debian ... but it wouldn't work if I didn't add the /@/ path component. Those paths are symlinks into boot/ (latest version of kernel and initrd).
 
 zfs list ... SSD/ROOT 30.7G 61.7G 23K none SSD/ROOT/Debian 11.5G 61.7G 11.5G legacy SSD/ROOT/FreeBSD 949M 61.7G 949M /mnt/FreeBSD SSD/ROOT/Void 18.2G 61.7G 18.2G legacy ... # ls -l /boot/efi/EFI/refind/drivers_x64/ total 239 -rwx------ 1 root root 83222 Sep 16 18:13 btrfs_x64.efi -rwx------ 1 root root 69384 Sep 17 09:41 ext4_x64.efi -rwx------ 1 root root 90336 Apr 25 2018 zfs_x64.efi
 
Zpool's name is SSD ... ZFSROOT is the partition name set with gdisk (gptfdisk).
Hope this helps.
 
I incorporated the suggestion into my /boot/efi/EFI/refind/refind.conf file with the appropriate changes:
 
menuentry "Arch Linux" { icon /EFI/refind/icons/os_arch.png volume zroot loader sys/arch-0/root/arch-RWSmith/@/vmlinuz-linux initrd sys/arch-0/root/arch-RWSmith/@/initramfs-%v.img options "zfs=zroot/sys/arch-0/root/arch-RWSmith \ cryptdevice=/dev/disk/by-partlabel/Root-0-NVMe:zroot \ rw \ add_efi_memmap \ initrd=boot\intel-ucode.img \ initrd=boot\initramfs-%v.img \ initrd=etc\zfs\zroot.key" }
 
but it didn't help :( I tried other small tweaks in that configuration file but they also did not work. For example, instead of volume zroot, I tried entering volume Root-0-NVMe.
 
I was originally trying to use rEFInd as my exclusive bootloader and utilizing the ZFS drivers/binaries from here. The file I driver I downloaded is zfs_x64.efi. I saved the zfs_x64.efi driver in multiple locations before and after installing rEFInd via running the refind-install script, even though one location should have sufficed. I saved a copy of zfs_x64.efi in /usshare/refind/drivers_x64, /boot/efi/EFI/refind, /boot/efi/EFI/refind/drivers, /boot/efi/EFI/, /boot/efi/EFI/refind/tools, /boot/efi/EFI/refind/tools/drivers, /boot, and /boot/drivers. I may have saved copies in other locations, just in case, but it also did not help.
 
I would like to highlight that /boot is located within the ZFS natively encrypted zrootpool.
 
I am pretty sure that that I am doing something incorrectly with the configuration files for the rEFInd bootloader, but everything else should be correct. However, as I write this, I barely realized did I not use the following commands recommended from the "Usage" section from the aforementioned website where I downloaded the zfs_x64.efi driver file for rEFInd:
 
zfs_x64.efi map -r
 
So this may be the problem, but I doubt it. I will try to enter the command next time I have access to my computer. The extra datasets involving /usr, /tmp, /srv, /opt, and /var may also be contributing my issues.
 
That said, after weeks of frustrating research and attempts of diagnosing the problem, I thought I would give ZFSBootMenu a try to see if it would fix all my issues, but it did not help either. As recommended by the Arch Wiki (Generate a ZFSBootMenu image), I set up my /etc/zfsbootmenu/config.yaml as thus:
 
Global: ManageImages: true BootMountPoint: /boot/efi DracutConfDir: /etc/zfsbootmenu/dracut.conf.d PreHooksDir: /etc/zfsbootmenu/generate-zbm.pre.d PostHooksDir: /etc/zfsbootmenu/generate-zbm.post.d InitCPIO: true InitCPIOConfig: /etc/zfsbootmenu/mkinitcpio.conf Components: ImageDir: /boot/efi/EFI/zbm Versions: 3 Enabled: false syslinux: Config: /boot/syslinux/syslinux.cfg Enabled: false EFI: ImageDir: /boot/efi/EFI/zbm Versions: false Enabled: true Kernel: CommandLine: ro quiet loglevel=0
 
I also try to incorporate some of the recommendations from the ZFSBootMenu wiki and also a different page on the wiki from the guide, but it was difficult to follow since Arch Linux utilizes mkinitcpio and not dracut.
 
Here is how I have my pacman.conf file:
nano /etc/pacman.conf:
 
Color VerbosePkgList ParallelDownloads = 10 ILoveCandy [core] SigLevel = PackageRequired Server = https://archive.archlinux.org/repos/2023/05/21/$repo/os/$arch [extra] SigLevel = PackageRequired Server = https://archive.archlinux.org/repos/2023/05/21/$repo/os/$arch [community] SigLevel = PackageRequired Server = https://archive.archlinux.org/repos/2023/05/21/$repo/os/$arch [multilib] [core] SigLevel = PackageRequired Server = https://archive.archlinux.org/repos/2023/05/21/$repo/os/$arch [archzfs] SigLevel = Optional TrustAll Server = https://archzfs.com/$repo/$arch
 
My mkinitcpio.conf file:
 
MODULES=(usbhid \ xhci_hcd \ nvidia \ nvidia_modeset \ nvidia_uvm \ nvidia_drm) FILES=(/etc/zfs/zroot.key) HOOKS=(base \ udev \ autodetect \ modconf \ block \ keyboard \ keymap \ encrypt \ zfs \ usr \ filesystems \ fsck shutdown)
 
In my /etc/fstab file, I commented out all my ZFS datasets, and simply left the line for my ESP uncommented, as follows:
 
/dev/disk/by-partlabel/EFI-0-NVMe \ /boot/efi vfat \ rw,\ relatime,\ fmask=0022,\ codepage=437,\ iocharset=ascii,\ shortname=mixed,\ utf8,\ errors=remount-ro \ 0 2
 
Before, instead of /dev/disk/by-partlabel/EFI-0-NVMe, I had UUID=####-####.
 
Here is my zpool:
 
zpool create -f \ -o ashift=12 \ -O encryption=aes-256-gcm \ -O keylocation=file:///etc/zfs/zroot.key \ -O keyformat=passphrase \ -O pbkdf2iters=750000 \ -O acltype=posixacl \ -O relatime=on \ -O xattr=sa \ -O compression=lz4 \ -O checksum=sha512 \ -O dedup=sha512 \ -O normalization=formD \ -O dnodesize=auto \ -o autotrim=on \ -m none \ -R /mnt \ zroot \ /dev/disk/by-partlabel/Root-0-NVMe
 
Here are my 48 ZFS Datasets:
 
#1 zfs create -p \ -o mountpoint=none \ zroot/sys/arch-0 #2 zfs create -o mountpoint=none \ zroot/sys/arch-0/root #3 zfs create -o mountpoint=/ \ -o canmount=noauto \ zroot/sys/arch-0/root/arch-RWSmith zfs mount zroot/sys/arch-0/root/arch-RWSmith #4 zfs create -o mountpoint=none \ zroot/sys/arch-0/data #5 zfs create -o canmount=on \ -o mountpoint=/home \ zroot/sys/arch-0/data/home #6 zfs create -o canmount=on \ -o mountpoint=/root \ zroot/sys/arch-0/root/arch-RWSmith/root #7 VAR zfs create -o canmount=off \ -o mountpoint=/var \ -o refquota=35G \ zroot/sys/arch-0/var #8 zfs create -o canmount=on \ -o mountpoint=/valog \ -o refquota=10G \ zroot/sys/arch-0/valog #9 zfs create -o canmount=on \ -o mountpoint=/valog/audit \ -o quota=10G \ zroot/sys/arch-0/valog/audit #10 zfs create -o canmount=on \ -o mountpoint=/valog/journal \ -o quota=10G \ zroot/sys/arch-0/valog/journal #11 zfs create -o canmount=on \ -o mountpoint=/vatmp \ -o quota=3G \ zroot/sys/arch-0/vatmp #12 zfs create -o canmount=on \ -o mountpoint=/vacache \ zroot/sys/arch-0/vacache #13 zfs create -o canmount=off \ -o mountpoint=/valib \ zroot/sys/arch-0/valib #14 zfs create -o canmount=off \ -o mountpoint=/valib/systemd \ zroot/sys/arch-0/valib/systemd #15 zfs create -o canmount=on (?) \ -o mountpoint=/valib/systemd/coredump \ zroot/sys/arch-0/valib/systemd/coredump #16 zfs create -o canmount=on \ -o mountpoint=/valib/libvirt \ zroot/sys/arch-0/valib/libvirt #17 zfs create -o canmount=on \ -o mountpoint=/valib/docker \ zroot/sys/arch-0/valib/docker #18 zfs create -o canmount=on \ -o mountpoint=/valib/mysql \ -o recordsize=8K \ -o primarycache=metadata \ -o logbias=throughput \ zroot/sys/arch-0/valib/mysql #19 zfs create -o canmount=on \ -o mountpoint=/valib/mysql/data \ -o recordsize=8K \ -o primarycache=metadata \ -o logbias=throughput \ zroot/sys/arch-0/valib/mysql/data #20 zfs create -o canmount=on \ -o mountpoint=/valib/mysql/log \ -o recordsize=8K \ -o primarycache=metadata \ -o logbias=throughput \ zroot/sys/arch-0/valib/mysql/log #21 zfs create -o canmount=on \ -o mountpoint=/valib/postgresql \ -o recordsize=8K \ -o primarycache=metadata \ -o logbias=throughput \ zroot/sys/arch-0/valib/postgresql #22 zfs create -o canmount=on \ -o mountpoint=/valib/postgresql/data \ -o recordsize=8K \ -o primarycache=metadata \ -o logbias=throughput \ zroot/sys/arch-0/valib/postgresql/data #23 zfs create -o canmount=on \ -o mountpoint=/valib/postgresql/log \ -o recordsize=8K \ -o primarycache=metadata \ -o logbias=throughput \ zroot/sys/arch-0/valib/postgresql/log #24 TMP zfs create -o canmount=on (?) \ -o mountpoint=/tmp \ -o reservation=16G \ -o quota=18G \ -o sync=disabled \ -o setuid=off \ -o devices=off \ -o com.sun:auto-snapshot=false \ zroot/sys/arch-0/tmp #25 SRV zfs create -o canmount=on \ -o mountpoint=/srv \ zroot/sys/arch-0/srv #26 OPT zfs create -o canmount=on \ -o mountpoint=/opt \ zroot/sys/arch-0/opt #27 USR zfs create -o canmount=noauto (?) \ -o mountpoint=/usr \ -o reservation=8G \ -o quota=11G \ zroot/sys/arch-0/usr zfs mount zroot/sys/arch-0/usr #28 zfs create -o canmount=on \ -o mountpoint=/uslocal \ zroot/sys/arch-0/uslocal #29 zfs create -o canmount=on (?) \ -o mountpoint=/uslib \ zroot/sys/arch-0/uslib #30 zfs create -o canmount=on \ -o mountpoint=/ussrc \ zroot/sys/arch-0/ussrc #31 zfs create -o canmount=on \ -o mountpoint=/usshare \ zroot/sys/arch-0/usshare #32 HOME zfs create -o canmount=on \ -o mountpoint=/home/youngroderick \ zroot/sys/arch-0/data/home/youngroderick #33 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/local \ zroot/sys/arch-0/data/home/youngroderick/local #34 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/config \ zroot/sys/arch-0/data/home/youngroderick/config #35 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/cache \ zroot/sys/arch-0/data/home/youngroderick/cache #36 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/media \ -o recordsize=1M \ zroot/sys/arch-0/data/home/youngroderick/media #37 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/games \ -o recordsize=1M \ zroot/sys/arch-0/data/home/youngroderick/games # OPTIONAL DATASETS #38 zfs create -o mountpoint=none \ zroot/e #39 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/e/books \ zroot/e/books #40 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/e/computer \ zroot/e/computer #41 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/e/personal \ zroot/e/personal #42 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/e/images \ zroot/e/images #43 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/e/media \ zroot/e/media #44 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/e/university \ zroot/e/university #45 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/e/workspace \ zroot/e/workspace #46 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/e/work \ zroot/e/work #47 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/e/reference \ zroot/e/reference #48 zfs create -o canmount=on \ -o mountpoint=/home/youngroderick/e/other \ zroot/e/other
 
I am not sure if the mountpoints I used for some are the ZFS datasets are appropriate and or are contributing to my issues of my bootloader not being able to detect my natively encrypted ZFS pool which holds my initramfs and vmlinuz-linux. Any suggestions would be welcomed. What is supposed to happen is that rEFInd should be automatically booting my natively ZFS encrypted Arch Linux system (if I don't select it first), prompt me to enter my password once before going forward with unlocking all my ZFS encrypted pool and datasets automatically and going forward with the typical boot process as if it were not encrypted.
 
I would like to highlight my original intention was to use rEFInd as my exclusive bootloader and not use ZFSBootMenu whatsoever. However, if I must use ZFSBootMenu in conjunction with rEFInd, then I will. I intend to to have this Samsung NVMe SSD M.2 512 GB 950 PRO dedicated to my Arch Linux (and other Linux systems) and utilize my second Samsung NVMe M.2 2 TB 980 PRO for Windows but boot it from rEFInd which is installed on my 950 PRO.
 
Any tips or suggestions would be well appreciated. I probably did something very dumb or some silly mistake.
 
Here are all the commands I used during my install of Arch Linux with ZFS Native Encryption on a single Samsung 950 PRO 512 GB NVMe M.2 SSD; I did my best to do things in a particular order such that there would be little to no conflicts:
 
loadkeys es mount -o remount,size=7G /run/archiso/cowspace passwd enter and verify root passwd ip -c a nano /etc/pacman.conf Color VerbosePkgList ParallelDownloads = 10 ILoveCandy [core] SigLevel = PackageRequired Server = https://archive.archlinux.org/repos/2023/05/21/$repo/os/$arch [extra] SigLevel = PackageRequired Server = https://archive.archlinux.org/repos/2023/05/21/$repo/os/$arch [community] SigLevel = PackageRequired Server = https://archive.archlinux.org/repos/2023/05/21/$repo/os/$arch [multilib] [core] SigLevel = PackageRequired Server = https://archive.archlinux.org/repos/2023/05/21/$repo/os/$arch [archzfs] SigLevel = Optional TrustAll Server = https://archzfs.com/$repo/$arch :x timedatectl set-ntp true pacman-key --populate pacman-key --init pacman -Syu modprobe zfs echo $? pacman -S --needed openssh screen duf nvme-cli lsblk nvme list nvme format --ses=1 /dev/nvme0n1 status=progress dd if=/dev/zero of=/dev/nvme0n1 bs=512 count=1 conv=notrunc status=progress fdisk -l /dev/nvme0 or parted -l /dev/nvme0 ls -l /dev/disk/by-id disk0=/dev/disk/by-id/nvme-Samsung_SSD_950_PRO_512GB_################ swapoff --all zpool labelclear -f $disk0 sgdisk --zap-all $disk0 sgdisk -n1:1M:+1G -t1:EF00 -c1:"EFI-0-NVMe" $disk0 sgdisk --zap-all lsblk ls -l /dev/disk/by-partlabel sgdisk -n2:0:0 -t2:BF00 -c2:"Root-0-NVMe" $disk0 lsblk ls -l /dev/disk/by-partlabel zpool labelclear -f /dev/disk/by-partlabel/EFI-0-NVMe zpool labelclear -f /dev/disk/by-partlabel/Root-0-NVMe mkdosfs -F 32 -s 1 -n EFI /dev/disk/by-partlabel/EFI-0-NVMe echo 'XxxBigDaddyRoderickWSmith69420!xXX' > /etc/zfs/zroot.key chmod 000 /etc/zfs/zroot.key Create ZFS Pool (See above) Create ZFS Datasets (See 48 above) zgenhostid $(hostid) chmod 700 /mnt/root chmod 1777 /mnt/tmp chmod 1777 /mnt/vatmp zpool set cachefile=/etc/zfs/zpool.cache zroot systemctl mask tmp.mount zfs umount -a zpool export zroot zpool import -d /dev/disk/by-id -R /mnt zroot -N zfs load-key zroot zfs mount zroot/sys/arch-0/root/arch-RWSmith zfs mount zroot/sys/arch-0/usr zfs mount -a df -h zpool set bootfs=zroot/sys/arch-0/root/arch-RWSmith zroot (?) mkdir -p /mnt/etc/zfs cp /etc/zfs/zpool.cache /mnt/etc/zfs/ zpool set cachefile=/etc/zfs/zpool.cache zroot cp /etc/zfs/zroot.key /mnt/etc/zfs cp /etc/hostid /mnt/etc cp /etc/resolv.conf /mnt/etc/ mkdir -p /mnt/boot/efi mount /dev/disk/by-partlabel/EFI-0-NVMe /mnt/boot/efi cd pacman -Syy pacstrap /mnt \ archzfs-linux-git \ b43-fwcutter \ base \ base-devel \ bash-completion \ broadcom-wl \ cryptsetup \ curl \ dhclient \ dhcpcd \ dkms \ dmidecode \ duf \ fwupd \ git \ grml-zsh-config \ intel-ucode \ iucode-tool \ lib32-nvidia-utils \ linux \ linux-atm \ linux-firmware \ linux-firmware-marvell \ linux-headers \ nano \ nvidia \ nvidia-dkms \ nvidia-utils \ openssh \ os-prober \ pacman-contrib \ refind \ screen \ sg3_utils \ sudo \ vim \ wget \ zfs-linux-git \ zfs-linux-git-headers \ zfs-utils-git \ zsh \ zsh-theme-powerlevel10k echo "UMASK=0077" > /etc/mkinitcpio.d/umask.conf lsinitcpio /boot/initramfs-linux.img grep zroot.key genfstab -U -p /mnt >> /mnt/etc/fstab zpool set bootfs=zroot/sys/arch-0/root/Root-0-NVMe zroot (again?) cp -r /etc/zfs-tools-driver /mnt/etc nano /mnt/etc/fstab Comment out everything except /boot/efi: /dev/disk/by-partlabel/EFI-0-NVMe \ /boot/efi vfat \ rw,\ relatime,\ fmask=0022,\ codepage=437,\ iocharset=ascii,\ shortname=mixed,\ utf8,\ errors=remount-ro \ 0 2 :x arch-chroot /mnt nano /etc/pacman.conf Color VerbosePkgList ParallelDownloads = 10 ILoveCandy [core] SigLevel = PackageRequired Server = https://archive.archlinux.org/repos/2023/05/21/$repo/os/$arch [extra] SigLevel = PackageRequired Server = https://archive.archlinux.org/repos/2023/05/21/$repo/os/$arch [community] SigLevel = PackageRequired Server = https://archive.archlinux.org/repos/2023/05/21/$repo/os/$arch [multilib] [core] SigLevel = PackageRequired Server = https://archive.archlinux.org/repos/2023/05/21/$repo/os/$arch [archzfs] SigLevel = Optional TrustAll Server = https://archzfs.com/$repo/$arch :x pacman -Syyu nano /etc/mkinitcpio.conf MODULES=(usbhid \ xhci_hcd \ nvidia \ nvidia_modeset \ nvidia_uvm \ nvidia_drm) FILES=(/etc/zfs/zroot.key) HOOKS=(base \ udev \ autodetect \ modconf \ block \ keyboard \ keymap \ zfs \ usr \ filesystems \ fsck shutdown) :x mkinitcpio -p linux zpool set cachefile=/etc/zfs/zpool.cache zroot (again, according to Arch Wiki?) refind-install (--path=/boot/efi (? add this extra tag, maybe?) # MAYBE: refind-install --usedefault /dev/nvme0n1p1 --alldrivers --no-scan ## Maybe change /dev/disk/by-partlabel/EFI-0-NVMe in lieu of /dev/nvme0n1p1 efibootmgr remove the necessary options via efibootmgr -b 1 -B efibootmgr -b 1 -B ## `-b 1` apply the change to boot option #1. ## `-B` the change to apply is to remove the boot option ls -l /dev/disk/by-partlabel efibootmgr -c -d /dev/nvme0n1 -p 1 -L "rEFInd (NVMe)" -l \\EFI\\refind\\refind_x64.efi efibootmgr -o #,#,#,#,# (reorder accordingly) cd cp /etc/zfs-tools-drivepetezfs/zfs_x64.efi /usshare/refind/drivers_x64 cp /etc/zfs-tools-drivepetezfs/zfs_x64.efi /boot/efi/EFI/refind cp /etc/zfs-tools-drivepetezfs/zfs_x64.efi /boot/efi/EFI/refind/drivers cp /etc/zfs-tools-drivepetezfs/zfs_x64.efi /boot/efi/EFI/ cp /etc/zfs-tools-drivepetezfs/zfs_x64.efi /boot/efi/EFI/tools cp /etc/zfs-tools-drivepetezfs/zfs_x64.efi /boot/efi/EFI/tools/drivers cp /etc/zfs-tools-drivepetezfs/zfs_x64.efi /boot/efi/ cp /etc/zfs-tools-drivepetezfs/zfs_x64.efi /boot/efi/drivers cp /etc/zfs-tools-drivepetezfs/zfs_x64.efi /boot/drivers cp /etc/zfs-tools-drivepetezfs/zfs_x64.efi /boot ls cd modprobe zfs echo $? nano /boot/refind_linux.conf "Boot with standard options" \ "zfs=zroot/sys/arch-0/root/arch-RWSmith \ cryptdevice=/dev/disk/by-partlabel/Root-0-NVMe:zroot \ rw \ add_efi_memmap \ initrd=boot\intel-ucode.img \ initrd=boot\initramfs-%v.img \ initrd=etc\zfs\zroot.key loglevel=4" :x nano /boot/efi/EFI/refind/refind.conf menuentry "Arch Linux" { icon /EFI/refind/icons/os_arch.png volume Root-0-NVMe loader /boot/vmlinuz-linux initrd /boot/initramfs-%v.img options "zfs=zroot/sys/arch-0/root/arch-RWSmith \ cryptdevice=/dev/disk/by-partlabel/Root-0-NVMe:zroot \ rw \ add_efi_memmap \ initrd=boot\intel-ucode.img \ initrd=boot\initramfs-%v.img \ initrd=etc\zfs\zroot.key" } ## Also add: scanfor manual,nvme,zfs_keys scanfor_manual +zfs/*/*.efi ## If any problems, remove this line ## scan_driver_dirs EFI/tools ## If any problems, remove this line ## timeout 10 :x pacman -Syu cat /etc/zfs/zroot.key ls -l /boot/initramfs-linux.img passwd enter and verify root passwd nano /etc/systemd/system/[email protected] [Unit] Description=Weekly zpool scrub on %i [Timer] OnCalendar=weekly AccuracySec=1h Persistent=true [Install] WantedBy=multi-user.target :x nano /etc/systemd/system/[email protected] [Unit] Description=zpool scrub on %i [Service] Nice=19 IOSchedulingClass=idle KillSignal=SIGINT ExecStart=/usbin/zpool scrub %i [Install] WantedBy=multi-user.target :x zpool status -t zroot zpool set autotrim=on zroot nano /etc/systemd/system/[email protected] [Unit] Description=Monthly zpool trim on %i [Timer] OnCalendar=monthly AccuracySec=1h Persistent=true [Install] WantedBy=multi-user.target :x nano /etc/systemd/system/[email protected] [Unit] Description=zpool trim on %i [Service] Nice=19 IOSchedulingClass=idle KillSignal=SIGINT ExecStart=/usbin/zpool trim %i [Install] WantedBy=multi-user.target :x mkdir -p /etc/zfs/zfs-list.cache ln -s /uslib/zfs/zed.d/history_event-zfs-list-cacher.sh /etc/zfs/zed.d systemctl enable \ zfs.target \ zfs-import-cache.service \ zfs-import.target \ zfs-import-scan (?) \ zfs-share \ zfs-zed.service \ [email protected] \ [email protected] systemctl start zfs-zed.service systemctl mask tmp.mount touch /etc/zfs/zfs-list.cache/zroot zgenhostid $(hostid) (again, according to Arch Wiki?) ## ("Check the contents of /etc/zfs/zfs-list.cache/. \ ## If it is empty, make sure that the zfs-zed.service \ ## is running and just change the canmount property \ ## of any of your ZFS filesystem by running: \ ## zfs set canmount=off zroot/fs1") pacman -Syu pacman -S --needed \ alsa-card-profiles \ alsa-firmware \ alsa-lib \ alsa-plugins \ alsa-utils \ acpid \ avahi \ bridge-utils \ dialog \ dnsmasq \ dnsutils \ dosfstools \ firewalld \ gvfs \ gvfs-smb \ haveged \ inetutils \ ipset \ iptables-nft \ mtools \ networkmanager \ network-manager-applet \ nfs-utils \ nss-mdns \ ntfs-3g \ pipewire \ pipewire-alsa \ pipewire-jack \ pipewire-pulse \ reflector \ rsync \ sof-firmware \ terminus-font \ tlp \ usb_modeswitch \ usbmuxd \ usbutils \ wireplumber \ wpa_supplicant \ xdg-user-dirs \ xdg-utils ln -sf /usshare/zoneinfo/America/Los_Angeles /etc/localtime hwclock --systohc nano /etc/locale.gen Uncomment en_US.UTF-8 UTF-8 Uncomment es_ES.UTF-8 UTF-8 :x locale-gen echo "KEYMAP=es" >> /etc/vconsole.conf echo "RWSmith" >> /etc/hostname nano /etc/hosts 127.0.0.1 [tab] [tab] localhost ::1 [tab] [tab] localhost 127.0.1.1 [tab] [tab] RWSmith.localdomain [tab] RWSmith :x useradd -mU -s \ /bin/zsh \ -G \ sys,\ log,\ network,\ floppy,\ scanner,\ power,\ rfkill,\ uucp,\ users,\ video,\ storage,\ plugdev,\ optical,\ lp,\ audio,\ wheel,\ adm,\ sudo \ youngroderick passwd youngroderick enter and confirm passwd cp -a /etc/skel/. /home/youngroderick chown -R youngroderick:youngroderick /home/descartes EDITOR=nano visudo Uncomment %wheel ALL=(ALL) ALL :x nano etc/xdg/reflectoreflector.conf --country US --protocol https --latest 5 --sort rate --save /etc/pacman.d/mirrorlist mkdir /etc/zfs/zfs-list.cache (not needed, file already exists) touch /etc/zfs/zfs-list.cache/zroot (?) cat /etc/zfs/zfs-list.cache (Fix the paths to eliminate /mnt:) ? sed -Ei "s/mnt/?/" /etc/zfs/zfs-list.cache/* (?, I don't think I should or need to do this) systemctl enable \ acpid \ avahi-daemon \ firewalld.service \ fstrim.timer \ haveged.service \ NetworkManager \ reflector.timer \ rsyncd \ sshd \ systemd-timesyncd \ tlp \ usbmuxd \ systemctl disable dhcpcd.service exit cd / umount -l /mnt/boot/efi zfs umount -a zpool export zroot umount -a
 
Lastly, if it matters, here is my hardware:
  1. ASUS RAMPAGE V EDITION 10 (X99) Motherboard
  2. Intel i7-6950X
  3. Corsair Vengeance LPX 128 GB DDR4 (NON-ECC)
  4. x2 ASUS ROG STRIX GTX 1080 Ti OC
 
Thank you for taking the time to read my wall of text. I have spent months researching and reading before I even considered attempting this project and or seeking help.
submitted by PmMeYourFeels to zfs [link] [comments]

2023.05.30 08:01 LackingUtility What do you think of this Ryzen 9 7950X32/RTX 3090 build?

My primary concern is the AIO cooler on the CPU claims to be 398mm and the case claims to support only a 360mm radiator. Is that just a labeling difference (since the AIO cooler has 360mm in 3x120mm fans)?
​
[PCPartPicker Part List](https://pcpartpicker.com/list/DFhxnt) TypeItemPrice :----:----:---- **CPU** [AMD Ryzen 9 7950X3D 4.2 GHz 16-Core Processor](https://pcpartpicker.com/product/X6XV3C/amd-ryzen-9-7950x3d-42-ghz-16-core-processor-100-100000908wof) $690.99 @ Amazon **CPU Cooler** [ARCTIC Liquid Freezer II 360 A-RGB 48.8 CFM Liquid CPU Cooler](https://pcpartpicker.com/product/y7wypg/arctic-liquid-freezer-ii-360-a-rgb-488-cfm-liquid-cpu-cooler-acfre00101a) $159.99 @ Amazon **Thermal Compound** [Arctic Silver 5 High-Density Polysynthetic Silver 3.5 g Thermal Paste](https://pcpartpicker.com/product/6RrG3C/arctic-silver-thermal-paste-as535g) $6.95 @ Amazon **Motherboard** [\*Asus PRIME X670-P ATX AM5 Motherboard](https://pcpartpicker.com/product/RMLFf7/asus-prime-x670-p-atx-am5-motherboard-prime-x670-p) $242.02 @ Amazon **Memory** [G.Skill Trident Z5 RGB 64 GB (2 x 32 GB) DDR5-6400 CL32 Memory](https://pcpartpicker.com/product/636p99/gskill-trident-z5-rgb-64-gb-2-x-32-gb-ddr5-6400-cl32-memory-f5-6400j3239g32gx2-tz5rk) $249.99 @ Amazon **Storage** [\*Crucial P5 Plus 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive](https://pcpartpicker.com/product/VZWzK8/crucial-p5-plus-2-tb-m2-2280-pcie-40-x4-nvme-solid-state-drive-ct2000p5pssd8) $122.49 @ Amazon **Storage** [Crucial P3 4 TB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive](https://pcpartpicker.com/product/JhzhP6/crucial-p3-4-tb-m2-2280-nvme-solid-state-drive-ct4000p3ssd8) $199.99 @ Amazon **Video Card** [\*Zotac GAMING AMP Extreme AIRO GeForce RTX 4090 24 GB Video Card](https://pcpartpicker.com/product/9x4Ycf/zotac-gaming-amp-extreme-airo-geforce-rtx-4090-24-gb-video-card-zt-d40900b-10p) $1639.00 @ Amazon **Case** [Corsair 5000D AIRFLOW ATX Mid Tower Case](https://pcpartpicker.com/product/PWn8TW/corsair-5000d-airflow-atx-mid-tower-case-cc-9011210-ww) $154.99 @ Amazon **Power Supply** [\*Corsair RM1000x (2021) 1000 W 80+ Gold Certified Fully Modular ATX Power Supply](https://pcpartpicker.com/product/jRvdnQ/corsair-rm1000x-2021-1000-w-80-gold-certified-fully-modular-atx-power-supply-cp-9020201-na) $188.98 @ Amazon **Operating System** [Microsoft Windows 11 Home OEM - DVD 64-bit](https://pcpartpicker.com/product/dKkWGX/microsoft-windows-11-home-oem-dvd-64-bit-kw9-00633) $119.99 @ Amazon *Prices include shipping, taxes, rebates, and discounts* **Total** **$3775.38** \*Lowest price parts chosen from parametric criteria Generated by [PCPartPicker](https://pcpartpicker.com) 2023-05-30 01:58 EDT-0400
submitted by LackingUtility to buildapc [link] [comments]

2023.05.30 07:58 pipemybiits Looking for advice on a new build

Hey everyone, i'm in the market to build a new PC since i'll be giving me current one away to a step nephew.
I'm looking to get around 6 - 9 years of comfortable use. Not looking for anything fancy at 4k 60fps+ etc. I currently have a 1070 and pretty happy with it but i have a family member who could use a new PC and so that gives me a reason to build a whole new one for myself. This is currently what i have after some iterations
Prefer the smaller form factor case
PCPartPicker Part List
Type Item Price
CPU AMD Ryzen 5 7600 3.8 GHz 6-Core Processor $219.99 @ Amazon
CPU Cooler Noctua NH-U9S 46.44 CFM CPU Cooler $59.95 @ Amazon
Motherboard Gigabyte B650 AORUS ELITE AX ATX AM5 Motherboard $219.99 @ Amazon
Memory G.Skill Trident Z5 RGB 32 GB (2 x 16 GB) DDR5-6400 CL32 Memory $129.99 @ Newegg
Memory G.Skill Trident Z5 RGB 32 GB (2 x 16 GB) DDR5-6400 CL32 Memory $129.99 @ Newegg
Storage Samsung 990 Pro 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive $169.99 @ B&H
Video Card Asus DUAL OC GeForce RTX 4070 12 GB Video Card $599.99 @ Amazon
Case Lian Li O11 Air Mini ATX Mid Tower Case $109.99 @ B&H
Power Supply SeaSonic FOCUS Plus 650 Gold 650 W 80+ Gold Certified Fully Modular ATX Power Supply $132.98 @ Newegg
Case Fan Noctua A14 PWM 82.5 CFM 140 mm Fan $23.95 @ Amazon
Case Fan Noctua A14 PWM 82.5 CFM 140 mm Fan $23.95 @ Amazon
Case Fan Noctua A14 PWM 82.5 CFM 140 mm Fan $23.95 @ Amazon
Case Fan *Noctua A14 PWM 82.5 CFM 140 mm Fan $23.95 @ Amazon
Prices include shipping, taxes, rebates, and discounts
Total $1868.66
*Lowest price parts chosen from parametric criteria
Generated by PCPartPicker 2023-05-30 02:06 EDT-0400
submitted by pipemybiits to buildmeapc [link] [comments]

2023.05.30 07:30 McNeelGraphics Moto G Power 5G (2023) Vibration Motor

So I just got a Moto G Power 5G today, and everything on it is super awesome. I'm in love. But the only issue I seem to be having involves the vibration motor. At the very beginning of a call or notification vibration, the motor is very loud for a split second before it completes the vibration sequence normally.
Is this normal for this device or do I have a defective motor on my hands?
submitted by McNeelGraphics to motorola [link] [comments]

2023.05.30 07:28 -inori- Help deciding what parts to upgrade if any - last upgrade ~2019

Hello everyone! I was hoping I would be able to get some help deciding what parts if any to upgrade for my current setup below. I am not entirely tech-illiterate, but definitely have a lot that I don't know, so any opinions/information would be appreciated!
My three main areas of consideration for upgrading are:
For reference my general use case is listed here:
I generally don't have many bottlenecks except in the following cases -
​
PCPartPicker Part List: https://pcpartpicker.com/list/cRMK6r
CPU: Intel Core i9-9820X 3.3 GHz 10-Core Processor
CPU Cooler: Corsair H100i v2 70.69 CFM Liquid CPU Cooler
Motherboard: MSI Creator X299 EATX LGA2066 Motherboard
Memory: Patriot Viper RGB 16 GB (2 x 8 GB) DDR4-3600 CL16 Memory (x4 for 64GB RAM)
Storage: Samsung 840 Evo 500 GB 2.5" Solid State Drive
Storage: Samsung 860 QVO 2 TB 2.5" Solid State Drive
Storage: Seagate BarraCuda 3 TB 3.5" 7200 RPM Internal Hard Drive
Video Card: Asus STRIX GAMING GeForce GTX 1080 Ti 11 GB Video Card
Case: Cooler Master HAF X ATX Full Tower Case
Power Supply: LEPA G 1600 W 80+ Gold Certified Fully Modular ATX Power Supply
submitted by -inori- to PcBuild [link] [comments]

2023.05.30 07:05 GarbageSecure1746 Wifi issues in Ubuntu 20.06.4LTS

I have dual booted windows 7 and Ubuntu 20.04.6LTS. I have a wifi dongle which is Digisol DN-WN3300N. On windows 7, I have a realtek lan utility to connect to the internet, and lights blink on the dongle. But on ubuntu, there is no blinking lights on the dongle, there is wifi enabled, there are visible wifi networks, but when i am trying to connect to anything, its saying "activation of network connection failed" (Not connecting to my phone hotspot too). I have tried everything on the internet which I dont even remember and got "There is no wifi adapter", so i reinstalled Ubuntu now. As of now, I did sudo apt update sudo apt upgrade lsusb: Bus 001 Device 012: ID 05c6:9024 Qualcomm, Inc. SAMSUNG_Android Bus 001 Device 003: ID 0bda:818b Realtek Semiconductor Corp. RTL8192EU 802.11b/g/n WLAN Adapter Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 2a7a:9a18 CASUE CASUE USB Keyboard Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 1c4f:0034 SiGma Micro Usb Mouse Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub lspci: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 01) iwconfig: lo no wireless extensions.
enp1s0 no wireless extensions.
wlx00177c8fa9a5 IEEE 802.11 ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry short limit:7 RTS thr=2347 B Fragment thr:off Power Management:off
usb0 no wireless extensions. Wifi Diagnostic script: https://pastebin.ubuntu.com/p/GHWw7YtTgh/ Please Help
submitted by GarbageSecure1746 to linuxquestions [link] [comments]

2023.05.30 06:33 MSakuEX Should I go with base 13 or base 14? Longtime Android user

My needs for the iPhone won't be necessarily particularly special or anything aside from calls and selfies. I've been through a crap ton of Android devices for the longest time and I've finally grown tired of both Google and Android. I love the pink on the 13 so that's ideally what I'd go with and purple is also a fantastic and favorite color of mine so I wouldn't mind going with the base 14 either if it's in store at T-Mobile same day to take home. I also don't mind the wait for UPS or FedEx to deliver me my precious pink 13 instead. The only thing I want to prioritize is being able to track it no matter what because I've been losing my Android several times recently... OnePlus 9 Pro and Motorola Moto G Stylus 2022 which I've forgotten on the bus multiple times lately and if I find it again then great but if I don't then I won't really care either. Apple is always leagues ahead of Google and most Androids, it takes Google ages to learn from Apple and iOS to catch up. I love that iOS won't fragment not slowdown as much or as easily or fast like Android. I also love the overall security aspects of iOS and Apple even if I really don't know much either about that.
Additionally, I'll be keeping my T-Mobile line as voice only even when I switch to iPhone. Again I just want a way to track down my iPhone and iPad even without data on my iPhone. I already pay for a data line on my iPad $20/mo unlimited so I'm happy and don't really want data on the iPhone especially with how expensive T-Mobile's plans are so that's why I'm sticking with dirt cheap voice only for $20/mo as well.
submitted by MSakuEX to iPhone13 [link] [comments]

2023.05.30 06:30 farmer_giles91 12 Days Honeymoon in Tokyo & Kawaguchiko with tips and observations

I just had my honeymoon (originally scheduled for Jun 2020). My wife and I are in our early thirties. It’s my wife’s first time in japan while it’s my fourth. I’ve benefitted immensely from stalking Tokyo travel reddit and would like to return the favour. I’ll provide some of my tips and observations to the end (skip to the end if the itinerary doesn’t interest you), some of which I think haven’t been mentioned before.
Thank God pretty much everything went to plan, and my wife thoroughly enjoyed the trip. We spent 12 days in Japan, most of it in Tokyo and 2 nights in Kawaguchiko. Many people were surprised to know that we’d be spending most of our trip in Tokyo, but I thought it was just fine because Tokyo had a lot to offer. My wife and I aren’t big on visiting shrines or ticking tourist hotspots off a checklist. We don’t shop much, but we did a lot of it simply because it’s Japan and we bought lots of quality-of-life items (not fashion) for ourselves and others. Given how much my wife really enjoyed the trip, I think others with similar interests could find something helpful too.
Pre-trip planning
Planning during the trip
Day 0 (Wed) 17 May - Arrival at Haneda Airport to hotel in Shinjuku
Arrived in Haneda late, about 11pm. Clearance was quick but baggage took 30mins. As I wouldn't make my stipulated airport limousine timing, I had no choice but to cancel my airport limousine and take the metro to our hotel in Shinjuku. I tried Apple wallet’s Suica at first. It worked seamlessly but I felt that a physical metro card was just faster so I eventually switched over. We reached after midnight, so do let your hotel know in advance if you anticipate arriving at odd hours.
Day 1 (Thurs) - Shinjuku exploration
Originally planned to visit Tsukiji on day 1, but given that we arrived late the previous night, agreed with my wife to change the plan and spend the first day doing the Shinjuku itinerary.
Day 2 (Fri) - Kappabashi St., Fabric Town, Akihabara
Day 3 (Sat) - Cooking class in Shinjuku, Shibuya
Day 4 (Sun) - Komazawa Church, Harajuku, Shibuya
Day 5 (Mon) - Tsukiji Market, Ginza Muji/Uniqlo, Tokyo station
Day 6 (Tue) - Tokyo National Museum, Fabric town revisit, Akihabara revisit, Ochanomizu
Day 7 (Wed) - Shinjuku Gyoen Garden, Mori Museum, Ginza Wakamatsu, Shinjuku
Day 8 (Thurs) - Kawaguchiko
Day 9 (Fri) - Fuji Q Highland, Shimoyoshida Honcho St, Batting Cage
Planning for Fuji Q & Morning Jog: I didn’t plan to go to Fuji-Q highland before the trip. Always felt it a bit of a waste to visit amusement parks overseas. That’s until I realised that Fuji Q had some of the most exciting (I mean world-record-holding) rollercoasters in the world. Maybe they don't hold the records anymore, but that intrigued me enough, because most amusement parks only had 1-2 coasters. Problem was that wife is terrified, and she said cycling on the streets of Kawaguchiko was already like a coaster ride for her. Still, I'm really thankful she encouraged me to go and said she was happy waiting and taking pictures for me. So I decided I would reach at opening time, and buy time by paying for the fast passes and try their top three coasters. The night before, we felt that we had to make decisions on our itinerary as it was our last day at Kawaguchiko. If Mt Fuji still wasn’t visible the next day, we'd go to Oshino Hakkai, if it was, we could try going to Shimoyoshida to get a nice picture.
Day 10 (Sat) - Kichijoji, Ghibli Museum, Kichijoji Jazz bar
Woke up before sunrise for a run and to attempt to catch a sunrise picture of Mount Fuji. Streets were completely empty. Even ran to the famous Kawaguchiko Lawson for a picture. Headed back for an onsen bathe (note: we never used the room's shower, and always went for an onsen bath throughout our stay in Kawaguchiko as it was just too convenient). Took a 7am bus to return to Shinjuku.
Day 11 (Sun) - Tokyo Sky Tree, Shinjuku, Back to Kichijoji, Shibuya
It was a crazy day where we simply hit the places we wanted to revisit regardless of proximity. Headed to Tokyo Skytree in the morning to check out another Ghibli store in hopes of getting another Ghibli shirt; reason was because I ended up buying one at the museum I really loved (made in Japan, beautiful colour, perfect fit. I hesitated at first because I couldn't try it). If you’re not going to the Ghibli museum, this is probably the best store available for Ghibli goods. Alas, the museum's items were really quite exclusive. Headed to Shinjuku to try curry udon, then to Kichijoji to try satou beef balls and dangos and to make some purchasing decisions on some sports equipment. Then we ended up at Shibuya (my favourite place!) to the mega Don Quijote and Tokyu Hands to shop for gifts for others. It was a lovely end to our trip!
Day 12 (Mon) - Back home
Best trip ever, says my wife.
Tips for travellers
Observations
I've decided not to mention the specific food places as far as possible because I think there's more than enough recommendations available elsewhere. I also think sometimes that we get a bit fomo if we build up too many must-go spots. Enjoy the process of discovering new places! But feel free to ask me more if you like.
submitted by farmer_giles91 to JapanTravel [link] [comments]